PS Series: Performance Characteristics - Load on Input Shaft - Dimensions - Engineering Details - PDF Catalogue

Parameter	Unit	Transmission ratio 8)	PS60	PS90	PS115
Nominal output torque 1) Tnom r	[Nm]	3, 15, 30	27	76	172
		4, 5, 7, 20, 25, 40, 50, 70	37	110	230
		10, 100	32	93	205
Nominal output torque 1) Tnom r	[Nm]	3, 15, 30 34 105 225 4, 5, 7, 20, 25, 40	34	105	225
		50, 70	48	123	285
		10, 100	37	112	240
Emergency stop output torque 2)Tem r	[Nm]	3, 15, 30	80	260	600
		4, 5, 7, 20, 25, 40, 50, 70	70	230	500
		10, 100	60	200	430
Nominal drive speed Nnom r	[rpm]	3	3000	2500	2000
		4, 5	3500	3000	2500
		7, 10, 15	4000	3500	3000
		20, 25, 30	4500	4000	3500
		40, 50	4800	4400	3800
		70, 100	5200	4800	4200
Maximum input speed Nmax r 3)	[rpm]	3-100	6000	5500	4500
Maximum radial force Prmax 4)	[N]		1650	4800	7500
Maximum axial load Pamax 5)	[N]		2100	3600	6800
Life	[h]		20 000 (lifetime lubrication)
Reversing play - standard 6)	[arcmin]	3 to 10 (1 step)	<6	<6	<4
		15 to 100 (2 step)	<8	<8	<6
Reversing play - reduced 6)	[arcmin]	3 to 10 (1 step)	<4	<4	<3
		15 to 100 (2 step)	<6	<6	<5
Efficiency at nominal torque	%	3 to 10	97	97	97
		15 to 100	94	94	94
Noise level at 3000 rpm 7)	[db]	3-100	<62	<62	<65
Torsional rigidity		3-100	3	12	27
Operating temperature		3-100	-20 to 90
Lubrication		3-100	per maintenance schedule
Orientation		3-100	any, details see ordering information
Direction of Rotation		3-100	same as input
Enclosure rating			IP65
Weight	[kg]	3 to 10	1.3	3.0	7.0
		15 to 100	1.7	5.0	10.0

1) At nominal speed Nnom r.
2) Maximum of 1000 stops.
3) Cycle mode.
4) Max. radial load applied to the center
of the shaft at 100 rpm
5) Max. axial load at 100 rpm.
6) Measured at 2 % of rated torque.
7) Measure at 1 m.
8) Gearboxes in bold print - ratios with
standard reversing play are on stock.

 

Chilford Court, Rayne Rd, Braintree, Essex, CM7 2QS Tel: 01376 333303  Fax: 01376 551849 Copyright © 2012 Motionmart. All rights reserved.